SEVEN provides a complete set of weather station compatible with Kaco inverter and Bluelog series dataloggers. It contains the required sensors for monitoring Solar PV Plants by using VCOM Monitoring Portal.
|Irradiation Sensor||3S-SR-3T-WS-I/U||Irradiance Sensors With Anolog Output|
|Ambient Temperature Sensor||3S-AT-PT1000||Ambient Temperature Sensor PT1000|
|Module Temperature Sensor||3S-MT-PT1000-I/U||Module Temperature Sensor 3S-MT-PT1000-I/U|
|Wind Speed Sensor||3S-WS-I/U||Wind Speed Sensor With Analog Output|
|Wind Direction Sensor||3S-WD-I/U||Wind Direction Sensor With Analog Output|
More Details about Kaco/BlueLog
Kaco new energy, founded in 1999, is a manufacturer of power converters, in particular inverters and monitoring accessories for photovoltaic systems. Since the end of April 2019, KACO new energy has been a subsidiary of Siemens AG. Since Meteocontrol’s blueLog is compatible with Kaco inverters, SEVEN Sensor, as a solution provider, produces a complete weather station containing sensors that are compatible with Kaco/BlueLog.
Kaco/BlueLog Weather Station’s components
The most required sensors for the Kaco/BlueLog meteorological station are as follows:
PV pyranometer, with Analog Output, is constructed from a monocrystalline solar cell connected to a high-precision shunt. This irradiance sensor must be placed away from any kind of obstacles, and it contains an integrated module temperature.
Ambient temperature Sensor, with PT 1000 Output, is mounted inside a solar radiation shield which has 8 aspiration plaques allowing air to pass freely. In fact, this shield is used to protect the ambient temperature sensor from any kind of irradiation.
Module temperature sensor, is covered by an aluminum plate to protect the data obtained. This sensor is used to measure panel temperature values in (° C). In addition, it offers an economical solution for solar power plants and universal applications.
Wind speed sensor, with analog output is made of stainless steel. It is used to measure wind speed in solar power plants, and to provide the data to the Kaco/Bluelog.
Wind Direction Sensor with an Analog Output signal, is used for monitoring the direction of the wind and providing the data obtained to the Datalogger.
VCOM Monitoring System
The BlueLog is a programmable device that records individual values and series of measurements over a long period of time. It collects all relevant data for the monitoring of the solar system. This Datalogger also offers a wide range of interfaces and functions for the control of PV systems.
The virtual control room or VCOM is a monitoring system for photovoltaic installations. It allows to quickly locate malfunctions in case of failure and to eliminate them efficiently. As it graphically shows the performance report and the thermal map. In addition, it compares the actual and theoretical production. VCOM allows mobile monitoring via iPhone and Android application.
Thanks to the graphical user interface, the Datalogger can be quickly and simply configured locally or remotely via VCOM.
During installation, if you face any difficulties, SEVEN engineers are available to provide you with a remote setup service and information on anything you may need.
Our sensors are produced in our plant operating in the Organized Industrial Zone of Corum. We have local and international sales.