PV Albedometer (Reference Cell) vs Thermopile Albedometer: What’s the Difference and Where Are They Used?

Albedometer

With the increased application of bifacial solar PV in utility scale installations, albedo measuring cannot be overlooked anymore. The reflected ground radiation influences directly the rear side contribution, power output, and performance ratio (PR).

Two types of albedometer measuring devices are typically deployed at PV sites:

  • PV Albedometer employing reference cells (silicon sensor)
  • Thermopile albedometer using pyranometers

Both devices are considered legitimate measuring instruments, and according to IEC 61724-1:2021, it recognizes the role that albedo plays in bifacial photovoltaic system efficiency. SEVEN offers both reference PV cell albedometers as well as thermopile albedometers, with class A quality performance.

Why is Albedo Measurement Essential in Bifacial PV?

In bifacial PV technology, not only is there power generation from front-side irradiation, but also from reflected irradiation from the ground. Factors that affect the albedo include:

  • Type of ground cover (soil, gravel, sand, snow, and concrete)
  • Weather conditions
  • Seasonal variations

Wrong assumptions about the albedo result in mistakes when calculating the bifacial gain and PR values.

IEC 61724-1:2021 outlines the principles of measurement in bifacial PV and focuses on the importance of rear-side and albedo measurements in the assessment of PV performance.

What Is a PV Albedometer (Reference Cell-Based)?

The PV albedometer is a sensor consisting of two silicon reference cells:

  • An upward-facing cell that measures the incoming POA irradiance
  • A downward-facing cell that measures the reflected irradiance

Principle of Measurement of PV Albedometer

As a result of its spectral response being very similar to that of PV modules, the reference cell will provide a PV representative albedo measurement, indicating the extent to which the reflected radiation may contribute to electrical power generation.

Common Applications of PV Albedometer

  • Bifacial PV system monitoring
  • Reverse-side irradiance measurements
  • Bifacial gain calculation
  • Evaluation of PR through irradiance relevant to PV cells

Advantages of PV Albedometer

  • PV-representative spectral response
  • Extremely fast response times
  • Small size and simple integration with PV monitoring system

PV Albedometers are used where there is interest in the PV system behavior, not just meteorological reflectance.

What is a Thermopile Albedometer?

Thermopile albedometer consists of two thermopile pyranometers facing each other head-on in position.

termopil albedo

How does Thermopile Albedometer Work?

The measurement of broadband irradiance performed by thermopiles is independent of any PV system. Therefore, it is considered as a reference instrument for measuring solar irradiance.

Applications of Thermopile Albedometer

  • Bankability monitoring applications
  • Independent assessment of resources and reflectivity of surfaces
  • Environmental assessments over a period of time
  • Projects that need technology-independent irradiance traceability

Major Features of Thermopile Albedometer

  • Broad spectral response range
  • Accepted in metrology standard

Thermopile albedometers are preferred when broadband irradiance measurements are needed.

PV Albedometer vs Thermopile Albedometer: Key Differences

The following table summarizes the differences between the PV Albedometer and the Thermopile Albedometer

Feature PV Albedometer (Reference Cell) Thermopile Albedometer
Sensor type Silicon reference cell Thermopile pyranometer
Spectral response PV-representative Broadband solar spectrum
PV performance relevance Very high Indirect
Meteorological reference Limited Strong
Typical focus Bifacial gain & PR Comparable to meteorological data

Application of IEC 61724-1:2021

IEC 61724-1:2021 is the internationally recognized standard for PV system performance monitoring. The standard:

  • Defines current monitoring concepts for PV power stations
  • Includes the aspect of accounting for bifacial PV systems
  • Emphasizes on irradiance measurement and rear irradiance measurement to evaluate the performance

PV reference cell albedometers and thermopile albedometers can both be used in a PV monitoring concept based on the IEC 61724-1:2021 standard if sensors with adequate precision and classification are selected.

SEVEN Albedometer Solutions: Class A Performance

SEVEN offers:

PV albedometers based on reference cell technology

Albedometers based on thermopiles using pyranometers

Both solutions can be ordered with class A precision, thus meeting the needs of current PV monitoring applications, including projects under IEC 61724-1:2021.

Such versatility makes SEVEN’s systems ideal for:

  • Representative PV measurement
  • Meteorological broadband measurement
  • And both types of measurement for additional confidence

Frequently Asked Questions: Albedometer

Which of the two albedometers will be better suited for a bifacial PV power plant?

The PV albedometer (reference cell) is best suited for PV-specific performance and bifacial performance. But the thermopile albedometer might be preferred due to broadband measurement.

Is there any IEC standard which mandates the use of one of the technologies?

No, it is all about the quality and relevance of the data; there is no necessity to mandate any kind of technology here.

Is it possible to use both of these technologies at once in a PV power plant?

Yes, some power plants use both PV and thermopile albedometers.

Ouijdane BENAMAR
Ouijdane BENAMAR Marketing Manager All Posts →